Видео

I know this video is a year old but wondering would this type of coilover do you have to remove everything to adjust the height all the time

This is amazing and informative content man, you deserve more attention.

How much kg/h should each throttle body pull i have ae111 itbs. Current synced them ,but all four pulling around 2.5 kg/h.

5:25 we’ve all been there lol

Great and simple. That digital dash is always amazing to see.

You need come to Indonesia because the hot climate I think AC is the first thing we modified when building 70s corolla or 80s corolla😂.

If you want to get crushed, buy a Harbor Freight jack 😂

What was the kit number?

Awesome video thank you 🙏

Nice advice and great said in the pinned comment too

Purchased an Altezza with the supercharger installed and I intend to take it off. Would I need to buy a new alternator mounting bracket? Any input on how difficult it would be to return to stock? And what I would need?

Im looking at y38 brz frs diffs for my is300 auto, for the 4.1 and torsen. I do have a disability and its my daily driver. Do I Need solid rear subframe bushings or can i still run the old bushings. I still need to redo front suspension with oem. Have you also ever seen a left hand mounted handbrake anyone uses, thinking of handbrake solutions outside of buying a rhd car

Fantastic advice and info! A solid "Stage Zero" and simple, purposeful mods are the greatest base to start with.

For those coming to the comment section saying "you don't need mods to hit the track" - I totally agree! Don't wait to go to the track "while you build your car". Just go and have a good time!

Sounds like the worst possible purchase. I like going far when I go out on my wave runner. Plus I workout at home. Sounds like you enjoy it and that’s all that matters.

Bought mine last week and i want some help and tips but there is no yt channel talking about it or a standup jet community group!!

Whose yacht is that? Also, cool vid!

Man I’ve been struggling with the rears on my annex kit for my 86. Set the perch adapter to the middle but the shocks bottom out before the spring is captured when adjusting them. Not sure why but it’s frustrating

Man always wanted to get into these!

Those things ware me out quick! Super fun though!

Can you recommend any idle control valves that work with this kind of setup?

S12 FTW!

You guys have so much fun

Hey so what would be best if I was running map sensor, stock intake manifold & turbo would I try to recirculate it back into the intake manifold?

Good morning I also fitted this suspension and with the roads in very poor condition here in Belgium I have swift springs in 6 and 4.7 What hardness settings did you set? For example - X click starting from the hardest at the front and the same for the rear Thanks

I feel like the bits that are discontinued could probably be 3D printed from ABS. Thoughts?

Does the AC steal a chunk of HP on these beams? Thinking about keeping mine

Hello, My 91' Lexus LS needs a fuel cell, and the one that is for that model is discontinued, I can buy a used one on eBay for $250 + 300 shipping I also need the fuel sending unit and fuel pump bracket and the same guy has one on eBay out of the same tank for $175, So as you say if the car is a failure I can always take the tank out and put it in something else or build an EXO Lexus and I'll have the proper fuel cell, My question is with all the electronics and everything and the the computer brain for that model I'm wondering if I'm going to have trouble putting an aftermarket tank in it, So is the Radium a good match for the old Lexus LS ??? Please help ! Thanks😯🤷😊👍🇺🇸

How do you get the gear out enough to get the the slide hammer in there?

This video answered absolutely every question I had about this subject. Thank You Devin.

🔥!!! Wow!! Devin, great video bro!! The information you cover is absolutely priceless for the ppl that want to install AC in their 86!! Great work brotha!!

I can relate to this BS

Hello.Sorry to bother you. What scan tool do you use on BEAMS?

actually, those digital clusters were an option in the U.S. they came in the celica and the supra... along with the OG swan logos... super rare

I've been struggling to get mine to work since I've had it regassed - will go through the system again. Thanks for the video, I'm currently trying to figure out what the different cables do behind the dash - i didn't see the RPM dial on the air con control last time, will give that a look If anyone else has any advice as to why the lines in the engine bay are cold, but no cold air comes out in the cab - I'd love to hear from you

Insta360 would have been the new king had they been smart enough to put a replaceable lens. GoPro is on my last nerve with their increase in prices and constant tech errors between the camera and their app. They want more money for the same or less quality and service.

Great job and wonderfully explained and shown. Top "accessory" for an AE86

I don't own an AE86, but I'm here to support since you've helped me out with my Altezza a bunch via your information. Altezza BEAMS compressors are no longer in production according to Toyota. If someone in the US could get a BEAMS compressor to Denso USA, I'm sure there is a updated version available. Worst case scenario, the pulley may need to be swapped. Same goes for the alternator. I've browsed through their website and have seen quite a few that are close, but they do not list measurements. From personal research, John Deere, Mitsubishi Pajero/Montero and Mercedes Benz all have used the same compressor with different pulleys in cars outside the US. I've tried contacting Denso USA via Email regarding the compressor but the representative was not familiar with the Altezza Compressor for obvious reasons. I'm actually contemplating sourcing one in the US, even if it doesn't work, just so that I can send it to them to have them verify a replacement model that fits. That way the community can benefit from knowing there are replacements out there. Part numbers and all. As a side note, the XV20 Camry that came with the 5S-FE looks like it would fit (why wouldn't it? It's an S series engine). But the pulley arrangement and a/c lin3 fitting angles may be different. Can't say for sure. But if it did, that'd be great because Camry parts are all over the place. Here's the information to Denso USA: maps.app.goo.gl/7kf1Cc27oGfdteWh7 Also, regarding alternators, there are 2JZ and 1NZ adapter kits available for the BEAMS engine. The problem is that there needs to be adequate amperage. The 1nz is actually lower at 80Amps vs 90amps ont he stock BEAMS 3S-GE. Going to aftermarket high output alternators are a hit and miss ass most companies that sell high output alternators do not send a dyno graph sheet to confirm the output to rpm specs. This that do make high quality high output alternators, charge a great fee as well. But what if you can get a decent amp with proven OEM reliability, that's able to be rebuilt with OEM parts? Well, 2JZ guys have been upgrading to the 2004 Sequoia 150 AMP alternator for years. All that's required is a connector repin and a little shaving of one of the mounting points. The pulley should be easily swapped from BEAMS alternator over to the Sequoia alternator, in theory. And if 2JZ guys can swap to the Sequoia alternator, and us BEAMS guys have 2JZ bracket options, theoretically we should be able to have that option as well. Better electric power for more stable ECU and accessory performance. Andnthose Sequoia alternators are probably all over junk yards in the US just laying there. Aspwholesale.com sells all the alternator and starter rebuild parts you'll ever need. The BEAMS 3S-GE starter is the same internally as other JZ and 4runner OSGR 1.4 starters. Rebuild parts also available via aspwholesale, for anyone who can't source a BEAMS starter. Rebuilding them is pretty easy, once you learn how to diagnose them. Usually it's the plunger and it's contacts that fail. Javebyet to see a worn brush on of these. Easy sub 20$ fix. Hope this helps and thanks @doctoredgarage for doing God's work.

Great job, dude!

amazing video man! for anyone wanting oem ac this is a very nice video! Im going an alternate route the 4ac crowd has went eletric ac system, still have to run a condensor, fan, dryer bottle, and an electric compressor so we dont have to run a belt or anything else. also they sell r-12 again on amazon its environmental atmosphere safe!

Hi great info Am in the process of installing a beams into my ae86. I got a fuel cell of eBay but need to use an external fuel pump, any recommendations on what pump and filter should I use? Requires need your help here

I always wondered if this would be possible I might do this to a sr5 coupe

Why would a fuel cell need ventilation while a standard basic gas tank doesn't?

One day I shall be like u 😂. Twwoo AE86😊

USDM bumpers are heavy, but they tie the front end together way better than the JDM ones.

AC FTW

So I have the bgrs rear setup and feel like it bottoms out too much and rolls a bit too much do you think it’d be wise to put a Cusco or the likes rear swaybar on it? Or upgrade both? Or think it’d cause too many other issues? Thanks!

Just now seeing this, RAD battle! I ran an extra 10 PSI to loosen up the car, but your 86 was way faster than I expected! I was bouncing all over the place and struggling to keep it on track due to the sway bar mount bolts pulling out of the chassis. Come back and slide with us again! -Mike

ae86 life is best!

Hey, you should check out DJI Action 4 too, same large sensor but smaller and more robust body